Last Chance to Register!

Laser Tubesheet Welding Demo
This Thursday, December 8!

Hosted by Nuclear Fabrication Consortium (NFC), B&W, DOE-NE

 This Thursday, December 8, the Nuclear Fabrication Consortium, Babcock & Wilcox (B&W), and DOE-NE will be demonstrating laser welding of heat exchanger tubesheets under the High Productivity Welding and Machining Demonstration project funded by the Department of Energy.

The purpose of this technology demonstration is to transfer autogenous laser welding knowledge to the nuclear industry and supply chain. There is no fee to attend this event, but pre-registration is required and seating is limited. Lunch will be provided. 

 What:    Laser Tubesheet Welding Demonstration 

When:   Thursday, December 8, 2011 from 9am-1pm -or- 12-4pm (pick one of two sessions) 

Where:  B&W’s Research Center 
              20 South Van Buren Avenue, Barberton, OH 44203

Register to attend either the morning or afternoon session. An agenda for each session can be found below. For more information, contact Steve Levesque, Project Manager, at or 614.688.5183 or Nate Ames, Director, Nuclear Fabrication Consortium, at 614.688.5135 or by email at

  Hope to see you there!

See the agenda below: 

AGENDA for December 8th
Morning Session:
8:30 – 9:00am        Sign-in
9:00 – 9:45am        B&W Overview
9:45 -10:00am       Break
10:00 – 11:00am    EWI Laser Presentation
11:00 – Noon          Laser Tubesheet Welding Demonstration
 Noon – 1:00pm      Lunch

Afternoon Session:
11:30am – Noon     Sign-in
Noon – 1:00pm       Lunch
1:00 – 1:45pm         B&W Overview
1:45 – 2:00pm         Break
2:00 – 3:00pm         EWI Laser Presentation
3:00 – 4:00pm         Laser Tubesheet Welding Demonstration

Leave a Reply

Latest News

EWI’s Fundamentals of Welding Engineering Class to be offered again this June
EWI's upcoming Fundamentals of Welding Engineering class for March is sold…
Martensite and Bainite in CGHAZ of HSLA Steel Welds
Martensite and Bainite in the CGHAZ of HSLA Steel Welds…
Flexible Manufacturing Options for Heavy Manufacturing
Earlier this month, EWI introduced the first installment in our…
Ohio Manufacturers’ Focus Group Set for May 27
A special focus group for Ohio manufacturers will be held on…
Predicting Weld Distortion – An EWI Guide for Heavy Manufacturers
Weld distortion is one of the biggest challenges in heavy…
Just Published: The Benefits of Laser-Based Inspection
EWI Principal Engineer Connie LaMorte and Business Development Director Jon Jennings were recently published…
EWI’s Ian Harris and Matt Short to Present at TITANIUM EUROPE 2015
Novel technologies will be featured during the Welding and Allied…
Just Published: Improved Welding of Primer-Coated Steels
EWI applications engineer Nick Kapustka and business development manager Paul Blomquist were published…